Multiplexer

A multiplexer or data selector, is a combinational circuit having  multiple input line, select lines and one output line. Further, multiplexers  integrated circuits are having ENABLE input, which has to to be activated to perform the multiplexer operation.  In multiplexer depending upon select lines the binary data present on inputs is passed to the output line.

If there are n select lines, then the maximum input lines are 2^n and the multiplexer is referred to as a 2^n-to-1 multiplexer or 2^n ×1 multiplexer. Figure below show the block presentation and truth table of  4-to-1 multiplexer.

Mux1 multiplexer

IC 74151

Figure below shows the 8-to-1  multiplexer Integrated circuit of TTL family 74151. This  Integrated circuit has active LOW
ENABLE input and gives complementary outputs.

Mux2

IC 74150

Figure below shows the 16-to-1  multiplexer Integrated circuit of TTL family 74150. This multiplexer has active LOW ENABLE input and active LOW output.

Mux3

 


Multiplexer Quiz

1. The number of control lines for a 8 – to – 1 multiplexer is

 
 
 
 

2. IC 74LS153 is a ______.

 
 
 
 

3. 1. A 4:1 Demux has _________ input and __________ outputs.

 
 
 
 

4. For the device shown here, let all D inputs be LOW, both S inputs be HIGH, and the input be HIGH. What is the status of the Y output?

mulitplexer device
device
 
 
 
 

5. One application of a digital multiplexer is to facilitate:

 
 
 
 

6. What is the function of an enable input on a multiplexer chip?

 
 
 
 

7. A multiplexer is also known as ——–

 
 
 
 

All About Basic Electronics